Jump to content
Sign in to follow this  
Martinas

V570 + V200-18-E4XB PULSE WITH MODULATION

Recommended Posts

Hello,

 

Iam new here, recently i started use Unitronics for my projects, so i have question.

 

1. Can i use PWM FB  for not-high speed digital output?

 

I want control heater. Cycle time will be about 10s, duty cycle depends from PID output.

 

 

I read examples, some forum threads..but i did not found accurate answer .

 

 

Iam asking for a help.

 

Best regards

Share this post


Link to post
Share on other sites

Hi Martinas,

In FB PWM cycle time is given in ticks of 2.5 ms. There is no theoretical limit for number of ticks and this way - the sycle time. For example - you can srt cycle time 4000 ticks of 2.5 ms, wich means it will be 10 seconds. You can drive any digital output from FB PWM, including relay.

I hope thhis answers your quesiton.

Share this post


Link to post
Share on other sites

 You wana  say 2.5 ms its system scan time?

 

 

 

 for example if i give 4000 units (cycle time) and 500 units ( duty cycle), then system will understood  that i want scan 4000 times  and 50% of scans will have  value 1 in memory bit?

 

 

Thanks for your response

post-16639-0-75634700-1374578216_thumb.png

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...