Jump to content

Recommended Posts

Hi

 

I've tried to control an intake fan and a extraction fan by using SET AND RESET Coils, controlled by a set point (saved as a HMI entry MI).

I also included a timer subroutine to try and prevent relay bounce

 

However the program does not reset the coil when the temperature lowers.

 

 

This is the Fan section of the project (the 1st image), showing the 'SET' part of the ladder

 

 

 

 

This is the 'RESET' net

Both the set and reset ladders also have a touch controlled on/off switch represented by positive/negative transitional

 

 

 

This image shows the timer net, that is meant to stop relay bounce

 

 

It should i think in theory work, if there are any experienced coders that would like to take a look that would be marvellous  

 

Thanks

 

Memphis

Share this post


Link to post
Share on other sites

Instead timer, maybe you can try ot set a little hysteresis. Please check the example ON-off control in VisiLogic.

I'll divide the conditions to start and stop the fan for both temperature and humidity setpoints and they both will operate bits. Then will OR these bits to activate the real output. This seems to me easy for edit and debug.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...