Jump to content
Sign in to follow this  
mckruger

Relay Outputs

Recommended Posts

Hi im trying to use the relay outputs for V200-18-1B

 

this is how ive set it up

 

0V on negative

V1 on normal V2 output connection (or on a normal positive connection)

 

When i link the output to a button push event

nothing happens

 

the normal setup for the normal outputs works fine.

 

am i doing something wrong

Share this post


Link to post
Share on other sites

Hello,

 

Thank you for using our Unitronics Forum.

 

Could you please explain which digital output you are using? (relay/transistor)

 

If you are using a relay output, please note in addition to powering V1 and V2, you will also have to supply power to the relay.  The V1 terminal will only power the output logic to close the relay.  But once the relay is closed, there needs to be some sort of power to run through it.

 

Please refer to the spec sheet found in the technical library, under our support tab of our website, for wiring configurations.

 

If you are using transistor outputs, you just needs to supply power to V2 and the output will send 24VDC out from the module itself.  The issue may then reside in your logic.  If you could attach a copy of your program for our review, that would help us to better troubleshoot.

 

Let us know if this helps.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...