Ortep Posted February 17, 2014 Report Share Posted February 17, 2014 I want to log some events by using few inputs. Every time the input signal goes UP, the event time should be stored to memory. Every day the memory contents should be send by email to specific email address. I have never before done anything with Unitronics Vision PLC:s and I am not sure, if this email send is even possible. I've downloaded the VisiLogic software and played a little with it. I found out there is function called "Data Tables", which could be useful to store the event data (time, date etc.) I could use the "Data Tables Write Row" -function every time, when specific input goes up. This way I could fill up the table. But this is only a speculation. Is this method even possible? What about sending the data with email? I tried to find out a solution, but didn't succeed. Could someone help me out on this? Quote Link to comment Share on other sites More sharing options...
Kikis Posted February 18, 2014 Report Share Posted February 18, 2014 All vision controllers support e-mail but enhanced vision models support additional features. There is a special topic for e-mails in the help file and there are also good project examples available which will be helpful for you. Quote Link to comment Share on other sites More sharing options...
TT_ZX Posted February 19, 2014 Report Share Posted February 19, 2014 Yes, everything you have said is possible. The first thing you need to decide is which model PLC you want to use and over what network you will send the email (cellular or ethernet). I only have experience with the Vision PLC's. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.