Jump to content
Sign in to follow this  
jblkiller

V350 with e-mail and ethernet

Recommended Posts

I have a V350 with ethernet card. I setup a counter for the maintenance. I send a e-mail when the plc reach the counter. Work great. Also I would like control the plc with Remote Access? I try but don't work. For e-mail I setup the block ''TCP/IP - Socket init'' Master. But I can't connect to plc whith Remote acces when I configure with e-mail.

Thanks. Can I send e-mail and use Remote Access?

Share this post


Link to post
Share on other sites

Hello,

 

Thank you for using our Unitronics Forum.

 

In order to use remote access while also sending e-mail via the Ethernet, you would need to initialize another socket and use that port number to connect and control the PLC via remote access. Our Ethernet ports will support up to 4 sockets for connection.

 

-Shane

  • Upvote 1

Share this post


Link to post
Share on other sites

Yes, each socket is already configured to a port, but you can change it in the configuration if you wish.

 

Socket 0: Port 20000

Socket 1: Port 20256

Socket 2: Port 502

Socket 3: Port 20257

 

Some port numbers are already defined for communications.  For instance, Port 502 is commonly used for MODBUS communication and Port 25 is used for e-mail routing between servers.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...