Jump to content
Sign in to follow this  

Recommended Posts

Hi,

this is my first Unitronics PLC, and I have some problem with addressing range. My configuration is V1040 + EX-RC1 + IO-DI8-TO8. I want to read inputs from IO-DI8-TO8 on V1040. When I copy Vector MI2008 from EX-RC1 to I160 in PLC and turn on first input on IO-DI8-TO8 value I160 in PLC is blinking (changing from 0 to 1 and then from 1 to 0). I tried to change address of data location in STRUCT block, the first good vale was I200. Is this memory area from I160 – I 199 reserved for same reasons? I don’t have this problem with outputs, I can use output number O160 and first output on IO-DI8-TO8 is turning on.

 

Best regards

Marcin

Share this post


Link to post
Share on other sites

as I had a similar condition in the past.   When the struct is placed directly on the rail this ensures it will run every scan.  When it is changed during a send command it can be problematic. In the past I have seen this condition generate a flicker to 0 as, if the struct is collecting during a send some values may be written as 0. It is also a good idea to use this contact in the vector  copy and compare as well.  This had cleared the condition I had with similar symptoms in the past.

Please let us know if this solution works well for you.

Mike

 

Can

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...