Jump to content

Recommended Posts

Hello!
 

Another one topic about PLC/E-mail, unfortunately, I'm not able to copy with the problem...

I use the ladder from Example (of course). I setted up PLC's IP, mask and gateway. Firstly, I wrote "telnet pop.gmail.com 25" in CMD to see the protocol type used by the e-mail server - ESMTP. After that I dial the text "ping pop.gmail.com" to see the IP address of the server. I changed a setting in "TCP/IP-Tcp Connect" block. The "Remote IP" inside the block is equal to  IP address of the server. The last change is in "E-Mail" block. "From:" e-mail is "support@unitronics.com" and "To:" e-mail is "..........@gmail.com". When i press "Connect" in HMI the connection is done. However when I press "Send E-mail" the program shows two different errors: "'From' address format incorrect"; "The server cannot receive data (DATA mode error)". Please, tell me where might be the mistakes to try to solve them!

 

Share this post


Link to post
Share on other sites

Hello!

 

Another one topic about PLC/E-mail, unfortunately, I'm not able to copy with the problem...

I use the ladder from Example (of course). I setted up PLC's IP, mask and gateway. Firstly, I wrote "telnet pop.gmail.com 25" in CMD to see the protocol type used by the e-mail server - ESMTP. After that I dial the text "ping pop.gmail.com" to see the IP address of the server. I changed a setting in "TCP/IP-Tcp Connect" block. The "Remote IP" inside the block is equal to  IP address of the server. The last change is in "E-Mail" block. "From:" e-mail is "support@unitronics.com" and "To:" e-mail is "..........@gmail.com". When i press "Connect" in HMI the connection is done. However when I press "Send E-mail" the program shows two different errors: "'From' address format incorrect"; "The server cannot receive data (DATA mode error)". Please, tell me where might be the mistakes to try to solve them!

Hello VasilPopov,

Unfortunately, the Email functions in Vision PLC's does not work with SSL encrypted email accounts (such as Gmail).

Please try non-encrypted email services (such as http://www.gmx.com/)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...