Jump to content
Sign in to follow this  
Donal Hogan

Stepper Motor

Recommended Posts

Hello,

 

I'm an automation student and part of my final year project is designing and building an automated storage and retrieval system. I'm using Unitronics V570 which is totally new to me so I've to get familiar with Unitronics firstly. I was going to use a 24v DC motor with position encoder and I was thinking of using a stepper motor aswell but I'm not sure if this is relatively easy to implement with the PLC. My question is, if it is possible to use both these methods is there videos on setting up and configuring and maybe a sample code for both that would get me started.

 

Thanks in advance

 

Donal.

Share this post


Link to post
Share on other sites

Hello Donal,

 

Thank you for using our Unitronics Forum.

 

This can definitely be achievable with Unitronics equipment. 

 

For controlling a stepper motor, please refer to our PTO Programming webinar at www.unitronics.com/support/webinars/pto.  Also, we have example programs of programming stepper motors within VisiLogic.  Please navigate to the help tab within VisiLogic and select "Examples...", then in the pop-up directory: Version 900>Project Examples>HSC_HSO or the PTO folder will have these examples. 

 

Also, there are many other webinars on examples of using VisiLogic on the webinars page of website.  www.unitronics.com/support/webinars

 

For the encoder, you can simply attach the A and B signal wires to the high speed inputs of an I/O module that supports a shaft encoder.  When setting up the high speed inputs in the hardware configurator, you will be able to select the option of a shaft encoder.  Please refer to the installation guide and technical specifications sheet of your I/O module for more information on how to wire the device.

 

Hope this helps!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...