Jump to content

Recommended Posts

A problem popped up with images on my V350.

 

We have historically uploaded our applications from the SD card reader (in production).

Now we face a new problem with images created by us.

 

On the SD upload, we are missing some of these images. Seems to be only for

button images. After uploading a project from the SD card, everyting seems to be ok except

that none of the button images are loaded. All buttons with images set, will be green.

 

To resolve the issue, we need to download an empty project on the V350 onboard serial port.

Then download the "real" project again, this also via the serial port.

All images are in place after this proceedure.

 

What would be the difference between making a clone or clone + OS on an SD card compared with

uploading the same project directly from the PC?

 

Is my image library not complete when making the clone file?

 

 

Regards

Andreas

Share this post


Link to post
Share on other sites

Hello Andreas,

 

When performing a clone+OS from SD it will download the projects and the selected operation system.

If the images will not be completely downloaded please verify that the Boot and the BinLib are compatible with the selected  operation system version.

Please use the your current VisiLogic version and create new clone+OS for the SD.

we recommend to use the latest VisiLogic V9.7.24 from our website.

 

I hope it helps..

Share this post


Link to post
Share on other sites
Hello dear colleagues.
I have a problem with V570 PLC.
During the download of a new OS screen PLC became darker and communication was lost. Currently there are no communication in any port and the screen remains blank.
I'll be very grateful if you could help me.

Share this post


Link to post
Share on other sites

Hello  icotenev.

If you reboot the PLC do you have communication with the PLC?

Please also try rebooting the PLC while pressing the screen. The PLC will start in boot mode and you will see a counter. Press the screen once more so the counter will stop.

Download the BIN lib only and then reboot the PLC.

Then try communicating and download the O/S.

Please let us know if this helps.

Share this post


Link to post
Share on other sites

Are you using the USB port. I found them unreliable. I have 14 Unitronics PLCs at work and the usb port on 3 of them stopped working. Bought a usb to serial converter and use the serial port for downloading. No more issues. 

  • Upvote 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...