Jump to content
Sign in to follow this  
Pottunaama

Modbus does not activate in connected GSM modem

Recommended Posts

I can not activate modbus in V570 via GSM. I am using same software routines that work fine with V120. Modem initialises fine in 

COM 1 (sb80=1), modem also connects fine when connected/called from modbus polling software (SB 86=1).

 

However, the modbus traffic doesn't initiate. The polling software says "Connected" and then "Modbus request failed".

 

Modem status in PLC (SI 80) lays with value 2. When connected, the value is 4, then chages to 1, then back to 2.

 

The polling software should be fine, it activates modbus OK with V120. So there may be some software problem in my V570 ladder code,

even it works in V120. Same modems and cables are used and V570 com port dips are in RS232.

 

What can prevent modbus traffic from being activated. I have used the Modbus config, SCAN, SCAN_EX and Porotocol config

function blocks but looks like I must be doing something wrong - even they work with V120.

 

All ideas greatly appreciated!

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...