Jump to content

Recommended Posts

Good Afternoon

I'm about to try a new project that is simple, so I was recommended to try the new Samba

I went for the 43, which I understand is a 3.5 x 4.3" screen

I don't see any hardware profiles for that!

Is it me or don't they exist yet?

 

Share this post


Link to post
Share on other sites

Hi Dave, 

I have included links to the specification sheets for the SM43 units. These can be found in the Support section of the Unitronics webpage under "technical library"

 

http://www.unitronics.com/docs/technical-library/specificationssm43.pdf?sfvrsn=0 (SM43-J-R20)

http://www.unitronics.com/docs/technical-library/specificationssm43-jt20.pdf?sfvrsn=0(SM43-J-T20)

 

Thanks

Share this post


Link to post
Share on other sites

Hello Dave,

 

Please ensure you have the most up-to-date VisiLogic.  Within the HW Configuration, please select the "Samba" tab, and the options for choosing either the SM35 or the SM45 will appear.  Once you have chosen the samba model (SM45 in your case) you will be prompted to choose the appropriate IO for that device (T20 or R20).

 

1 13 2015 12 00 17 PM

 

Let us know if this helps.

Share this post


Link to post
Share on other sites

Hmm

Im on 9.7.24 and its not there

I even just uninstalled and reinstalled it just now, and I only see the 35 version

I must be going crazy!

Share this post


Link to post
Share on other sites

Wish to thank Unitronics Support

They remoted in and even though I had uninstalled and reinstalled, something went haywire and they did their magic

Now Im back up and running again

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...