Jump to content
Sign in to follow this  
walter moreno

Help with managing Visiologic

Recommended Posts

Good night,recently bought my paper a rfe plc Samba: SM35-J-R20.

 

My knowledge of PLC programming are very basic, but have come to understand with the videos and the manual part of the basic programming.

 

But I need to display 4 timers for 4 different machines, and do reset with timers and stuff, I do not understand is how to modify the SB and MI that are already in the program.

 

example: I use SB then I use MI (counter in seconds) (accountant in minutes), and finally (counter in hours) link addresses in the HMI.
 
MB FOR counter = 4 seconds
MB FOR counter = 5 minutes
MB FOR counter = 6 hours
 
it works fine for a screen.
 
but I do not know how to put back the same counters to other screens ie replacing SB3, MI 1, MI 2, MI 3 and mofificarlos individually.
 
because otherwise change their nobres in the 4 screens will be controlled by the same sequence LADDER, and no I do not understand how to change your name without changing their established functions.
 
Or please how to program counters fastest time.
 
Thank you very much for any help.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...