Jump to content
Sign in to follow this  
JardaK

Windous 8

Recommended Posts


Hi,

 

I have windous 8, but only http://www.unitronics.com/W7 drivers.

The problem may be in the windows?

 


The PC-PLC Comunikace - It writes PLC update needed for Ethernet (yellow triangle with an exclamation mark)

 

 

This operation cannot be completed until the controller OS is updated. Either: Update the files: connect a USB stick to this PC and press Copy to USB Stick to copy files, and then use the USB stick to update the controller. or prees cancel to stop download

update needed.

 

 

 

Share this post


Link to post
Share on other sites

The UniStream panels are updated by downloading the firmware to a USB flash drive. In UniLogic you can navigate to the PLC ribbon then select UniStream Management and Firmware Manager. The firmware can then be copied to a USB flash drive by selecting Copy to DOK.

 

Once the files are copied, the USB drive can be placed into the UniStream's USB host. Navigate in UniApps to the System tab, then select Upgrades, and select Upgrade PLC.

 

The PLC will then take approximately 15 minutes to update. Please do not cycle power during this update process. Once updated you should be able to download projects using the new version of UniLogic.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...