Jump to content
Sign in to follow this  
JardaK

CPU does not count

Recommended Posts

Hello

 

I have a problem with the software.

After programming screens (graphics).

I started to program on the logical part.

None of the logical internal calculations.

But the touch screen can change the variables, when I look into wacth.

I can jump from screen to screen.

 

 

As shown in the figures.

the first part of example should add up whole period and in the second part should be attributed solely in response to the key pressed.

 

If I post the finished examples of websites Unitronics and behave exactly the same variables ragout touch on the screen, but there is no internal calculations.

 

Thank you for answer.

 

 



Share this post


Link to post
Share on other sites

Hello

 

I have had the same problem that you had, do you have a 10" screen and firmware 1.12.20 if so update the firmware to 1.13.09 or higher that fixed my problem.

Share this post


Link to post
Share on other sites
Thank you for your answers,

 

I sent it to support, support resolved through remote management. (He worked on the problem for about 2 hours)

I wrote to him about the details so that he wrote to me about what the fault was.

Unfortunately already written off.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...