Jump to content
Sign in to follow this  
YINGD

Wireless Remote IO

Recommended Posts

Does anyone know a way to operate one or more remote io wirelessly? I would like to use a Unistream HMI with PLC to control several remote io boxes located within about 100' of each other wirelessly. I am thinking that this canned one using a wireless can bus adapter but I have no experience doing this so I wanted to see if anyone has done this before and if so, what hardware was used?

Share this post


Link to post
Share on other sites

Hi,

 

Are you refering to EX-RC1? if not then what is the interface of the remote IO?

For example if it is third party remote IO which support Ethernet - you can connect routers , one at the PLC side and one at the Remote IO side and communicate over Ethernet.

iIf you are referring to EX-RC1 then we dont have expirience with CANBUS wireless adapters but if tehy are transparent then the configuration should be the same as in our examples.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...