Jump to content
Sign in to follow this  
clueless

new project

Recommended Posts

G'day chaps.

                        I have been tasked with generating a plc/hmi application for a process system using the USC-P-B10 and DPL050104.

This is my first project with Unilogic.......... so please be patient as I probably will come across as having the IQ of a hedgehog!

I am familiar with Schneider's Unity and Mitsubishi gear but as I get older it takes me longer to get to know others.

 

I do not see the hardware I am to use in the selection list?

The HMI library seems very small, do I have to download extra files?

 

That will do for starters.....

 

Please advise.

 

Share this post


Link to post
Share on other sites

Hello,

 

Are you referring to setting up the hardware configuration in the UniLogic software?  You should be able to find this through the solution explorer on the left hand side of the software under "Hardware Configuration".  Depending on what you would like to add, you can change the local I/O modules or the remote I/O modules through their respective options; you will find the I/O modules listed on the right hand side under the "Toolbox".

 

I am afraid I am unsure what you are referring to with the "HMI Library".  You should not have to download any additional files (only the sample programs if you wish to use them).  Could you please explain further?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...