Jump to content
wapcs

UniLogic - Gauges

Recommended Posts

Gauges - Can the Min, Max, Major, Minor and Ranges (Start and End) values be linked to integers rather than fixed values?

 

Also a 'Marker' added to the circular gauge would be nice. 

Share this post


Link to post
Share on other sites

+1 for enhanced Vision controllers also.  This is really necessary for OEM applications where the same program is used over and over, but the sensor ranges can always be different from one job to the next.  I know that the circular guages are not able to do the integer linking now, but this would be an awsome addition.

 

Thanks

Keith

Share this post


Link to post
Share on other sites

My apologies.
The request was looked into, and has proved impossible to implement - or rather, not impossible, but not practical in terms of the facts. The gauges are rendered as a graphic image. To enable these values to come from tags would mean that the PLC would need to draw the values, and calculate the locations, and in the case of the circular gauges, the ranges are radial...the overhead required is just too much.

Again, I apologize. The request was indeed added, but could not be honored, and I should have reported this.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...