stembera Posted December 30, 2015 Report Share Posted December 30, 2015 Hello world, is it possible to make Remote Operator to re-establish communication automatically after losing TCP connection? If negative, is there some workaround (e.g. some VBscript)? Now, if the connection is lost, only informing text appears on the screen and user has to click "stop communiaction" and "start communication" again to see the display. Many thanks for an idea, Michal. Quote Link to comment Share on other sites More sharing options...
Saragani Posted December 31, 2015 Report Share Posted December 31, 2015 Well, if you change the number of retries to a big number, then it will try and try up until no retries are left. On the retires, it tries to re-open the socket, so if the other side (PLC) has returned by then, then the connection should be re-established. Another solution is to have the Remote Operator in Listen, and the PLC calls to the PC. However, if the IP of the PC changes, it is not practical. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.