Jump to content
Sign in to follow this  
ZoranM

V130 Simple web server connection problem

Recommended Posts

Hi,

 

I`ve installed V130 with simple web server application, at remote facility. I ve succeed to connect remote web server from control centers PC  and it looks like it is working fine but ocationally link breaks.

 

Rebooting either remote router (HG531 v1 Firmware version HG531V1V100R001C90B017) or V130 recoveres the link. I ve set SB 168 already but problem persists. 

 

Is there any other way to automate lost link recovery process?

Share this post


Link to post
Share on other sites

Hi,

 

It seems that somehow the socket was were not closed properly and this might be the reason there is no option to reconnect .

 

Please set a power up value of 50 to SI103 – SI106 Keep alive according to the socket number you are using. (This is in units of 100ms)

For example if you are using socket 0 then set a power up value of 50 to SI103.

 

This enables the PLC to close the socket if there is no communication from the connected device.

  • Upvote 1

Share this post


Link to post
Share on other sites

Hi,

 

It seems that somehow the socket was were not closed properly and this might be the reason there is no option to reconnect .

 

Please set a power up value of 50 to SI103 – SI106 Keep alive according to the socket number you are using. (This is in units of 100ms)

For example if you are using socket 0 then set a power up value of 50 to SI103.

 

This enables the PLC to close the socket if there is no communication from the connected device.

I ve applied advised settings. During last 24h there haven t been any permanent link breaks. It seems the problem is solved. Thanks!  

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...