Jump to content

Recommended Posts

hello,

i need to monitor a square wave of 3V amplitude and 190 Hz.

can i display this signal on HMI trend graph? what extantion do i need ? analog input ?

i am using V570.

 

thanks.

Share this post


Link to post
Share on other sites

hi joe,

 

i need to monitor the frequency and amplitude, can i use digital input? and maybe convert the 0V -3.3V square wave to open gnd and display this on trend graph?

Share this post


Link to post
Share on other sites

Moran,

1.Trend have minimum sample time 0.1 sec.

2.As Joe say, Analog input is not so fast to sample 190 Hz.

3.Digital input does not sense levels, different from logical 0 and 1. So it cannot measure amplitude.

4.You can convert logical level to 0V/24V and use High Speed Counter to measure frequency, or period. But not signal amplitude.

5.With some kind of RC filter you can measure average of input signal by analog input.

 

Trend will not show high frequency signal. This is not a scope.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...