Jump to content
Sign in to follow this  
Pawks666

Jazz JZ20 R31 analog inputs

Recommended Posts

Hello,

 

I have a problem using analog voltage inputs (0 - 10V) with jazz.

 

When i connect one input (AN2 for example), the other input (AN3) also reads voltage which depends on AN2 input.

It's not the same value, but if AN3 is not connected, voltage read is about 80% of what AN2 reads.

 

When both inputs are connected, one affects the other and vice versa...

It's really significant effect, so i don't think it could be interference related.

 

Both inputs are also from the same power source and grounded.

 

Any ideas what could be wrong?

 

Thank you for help

 

Best regards,

 

Pawks

 

EDIT: I forgot to ground pin "n/p I16-I17", now it works fine. Sorry for that.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...