Jump to content
Sign in to follow this  
cscheda

Ascii key pad entry screen is not centered .............

Recommended Posts

Hi All,

I am using a V430-J-TA24,  Hardware rev B, OS 4.0 (19)   with Visilogic VER 9.9.2 build 0.

My issue for today is that the ascii key pad entry screen appears, but it is not centered in the screen.  It is centered too far to the right and as a result, the screen wraps around and continues on the left hand side of the display.  If I could shift the whole screen to the left, it would fix the issue.  I know there is an x and y setting SI 245 and 246,  but it says this is for the 1020 model.... 

Any suggestions on how to correct this?

 

Thanks once again

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...