Jump to content
Sign in to follow this  
Don2015

Load a different program from within a program on power up

Recommended Posts

Ok, I have done this before on a different PLC brand, but then again the different PLC brand did not have HMI built into the PLC.

 

By using inputs, and device net addresses, I was able to automatically load a different program into the PLC from the SD card, when a jig was connected fixture.

 

So each program had it's own loading program within it.

 

Will I be able to do this with a V700, and if so how many .vlp files could I have on an 8GB SD card?

 

Thanks,

Don

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...