Jump to content
SRO

Maximum size buffertag

Recommended Posts

Hey all,

 

The PLC I'm using is an Unistream 7".

 

I'm writing an application where the PLC needs to communicate with a server through a TCP connection.

Communication is established through a Restfull API;

- PLC asks the server when needed for a list of all the configured items on the server.

  This list is JSON-formatted, will be parsed by the PLC and then loaded into a DTI for further use..

- PLC sends updates to server when an item has changed state.

- Server sends commands to the PLC when an item needs to change state.

 

Setting up the TCP client Rx was a breeze!

Communicating with the server works like a charm if the received messages are smaller than the receiving buffertag of the TCP client Rx FB!

(e.g. commands from server to PLC)

If larger then the buffertag, the message will be truncated.

(e.g. List of items send by server to PLC)

=> According the help-file: due to insufficient buffer size (user buffer)

 

I noticed that a buffertag can be defined as a maximum of around 1600 bytes.

I was wondering why this limit?

And then again, if I could enlarge the buffer to say 3500 bytes and my list grows eventually beyond this limit..

 

So.. How do I receive a message that's larger then my predefined receivebuffer?

What am I missing?

 

Tnx in advance,

 

SRO

 

 

Share this post


Link to post
Share on other sites

TCP Communication is usually limited to 1536 bytes per chunk (packet), which is also known as MTU.

You will not loose the received data. Once you have read the data from the buffer, then reading from that socket again, will read the next bytes.

Share this post


Link to post
Share on other sites

Indeed,

the buffertag wasn't responsible for losing the received data.

 

My problem was because of the write limitation of the "append to file"-FB.

Maximum allowed size is 950 bytes.

Since I was just copying my receive buffer directly to the txt-file,

I wasn't able to retrieve all the data from the buffer!

 

Tnx for the feedback :)

 

SRO

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...