Jump to content
Sign in to follow this  
Abomination1

V350 and Profibus Digital Input Module

Recommended Posts

Hello

This is not possible because Unitronics plc can only act as profibus slave and the module you want to connect is also a profibus

slave. I see a Unitronics plc with profibus card as a intelligent remote i/o device including Hmi that you connect to a profibus master.

For Unitronics plc you have to look for modbus rtu or tcp remote i/o, or the i/o modules offered by Unitronics.

Kind regards

Henny

Share this post


Link to post
Share on other sites

Hello

 

@For Unitronics plc you have to look for modbus rtu or tcp remote i/o, or the i/o modules offered by Unitronics.

 

Canbus I/O can also be used by Unitronics.

Noticed that Murr also offers Can open protocol so I think you would need this one then.

http://shop.murrelektronik.com/en/I-O-Systems/Impact67/IMPACT67-COMPACT-MODULE-PLASTIC-55075.html

 

I don,t have experience with Canbus but at least I know that for a V350 you have to order a V100-17-can module.

 

Kind regards

Henny

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...