Jump to content
Fabios

Remote Modbus TCP I/O

Recommended Posts

I'm sure it's not unlimited, but you will be able to connect to 6 slaves easily. Just assign the IP addresses and Port numbers you wish to use in the PLC Communications/Protocols/MODBUS/Master and you will be able to communicate. I think UniStream can easily handle at least 30 simultaneous connections.

Share this post


Link to post
Share on other sites

Hi Fabio,

 

I was a little busy so just reading all new posts for me. I finished a big project and I can tell you now that communications with Unistream is really a big advantage over Vision series. In the system I have:

12 slaves

Reading more than 800 coils

Writing more than 1,800 coils

Reading more than 160 Int16

Writing more than 70 int16

Reading more than 464 int32

Writing more than 360 int 32

 

each 1,000 ms the Unistream 15 is making the work perfectly.

The system is working 24 x 7 since December 2015.

  • Upvote 2

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...