Jump to content
Sign in to follow this  
vamalgise

Cant communicate with V570 after downloading a program with Protocol FB

Recommended Posts

Hello,

I have new V570, i uploaded a program with nets to read registers from heat meter, 

Probably i made some mistake with COM initialization, now i cant download a program or view the PLC in online mode.

I have completely no clue how to fix it or reset PLC.

Please help me, i cant attach attach my program, because its 20KB bigger than the limit ((

 Thank you.

Share this post


Link to post
Share on other sites

Hello,

 

If you put the controller into "STOP MODE", you should be able to program a new application into the unit.

 

-Detach power from the PLC

-Press and hold your finger on the screen

-Apply power while your finger is still on the screen

-Once the unit is powered on, tap once on the screen

-After the 10 second time-out, it should enter STOP MODE

-Establish communications with VisiLogic (remember, default baud is 115200)

-Once comms are established, program unit with new application

 

Please let me know if this helps.

Share this post


Link to post
Share on other sites

Hello,

 

If you put the controller into "STOP MODE", you should be able to program a new application into the unit.

 

-Detach power from the PLC

-Press and hold your finger on the screen

-Apply power while your finger is still on the screen

-Once the unit is powered on, tap once on the screen

-After the 10 second time-out, it should enter STOP MODE

-Establish communications with VisiLogic (remember, default baud is 115200)

-Once comms are established, program unit with new application

 

Please let me know if this helps.

Thank you very much, it helped!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...