Jump to content
Sign in to follow this  
JohnR

PLC Name with serial connection?

Recommended Posts

Hey All,

Just an observation........

I just downloaded Remote Operator, first time I've tried it......

Just to get started and see how it works I tried connecting to a V280 that's sitting on my workbench, to which I just downloaded a program via the serial port.

The default serial setting in R/O are set the same as my PLC, but it also prompts for a PLC Name, and will not check connection without it.

So I went back and added a PLC Name (set by the Power Up Bit), and sure enough, now it works......

Now we all know you must have a PLC Name for I/P connection, but I've never seen this for serial connection (i.e. never needed this from Vision or Remote Access).

I was never in the habit of setting the PLC Name on projects that I didn't plan to be on my ethernet network.

Something new to remember if I want to keep my projects consistent......

 

Regards, JohnR

 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...