Jump to content
Sign in to follow this  
OSUstamm

UniCAN Send Suggestion

Recommended Posts

One small suggestion for the UniCAN Send Block. (It may happen on other communication blocks).

When selecting Destination Start Address MI it brings up the description of the address of the same numbered MI for the sending .vlp program. This seems funny to me because the description of that file from the sending program has nothing to do with the same MI of the receiving program. Also, if there is no description it adds the description of "Destination Start Address" to the sending program.

For Example...

If sending MI10 from PLCX to MI20 to PLCY. While setting this up in PLCX it would change MI20's description on PLCX to "Destination Start Address".

It seems silly to do it that way...

Share this post


Link to post
Share on other sites

Can you give some idea how you expect this to be?

I think it should be similar to the "Source Vector: Offset" or "Destination Vector: Offset". Just don't have it change the description.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...