Jump to content
Sign in to follow this  
Guest ERHunt

Samba analog output?

Recommended Posts

Guest ERHunt

According to this Samba Technical Specifications document, the Samba series PLC+HMI has two 0-10V or 4-20mA user selectable analog outputs:

http://unitronicsplc.com/wp-content/uploads/2015/12/SMXX-J-RA22-SPEC-2-16.pdf

Looking at the SM43-J-T20 sitting in front of me, that does not appear to be the case. Did the analog outputs get cut from the production model after that information sheet was put together, or is there another model of Samba that does include analog outputs natively?

Share this post


Link to post
Share on other sites

Hello,

 

It seems that you got the wrong Samba model as T20 has no analog output.

The samba models which have 2 channel analog output are TA22 and RA22.

"T" stands for transistor type digital outputs and "R" for relay type.

 

Btw the spec sheet you are referring to is for RA22 model, not for T20. 

 

There is not just one Samba model but various models with different I/O points on board.

Therefore every time you have to select the right model depending on your application.

 

You can find all available Samba models and their I/O details on Unitronics Website.

I/O points for each PLC model can also be found in the hardware configuration within Visilogic. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...