Jump to content
Sign in to follow this  
Hondaman

FAST RS-232 needed

Recommended Posts

I have need of an HMI-PLC unit with a serial (RS-232) port and possibly a USB port (for exporting collected data records) that can communicate as follows:

115Kb data rate, * bits, Odd parity, 1 stop bit, <STX> start, <ETX> end, followed by <bcc> checksum code at tail end which consists of an XOR 8-bit value of all characters preceding it (including the <STX> and <ETX> characters.

I realize I can create the string within the ladder code prior to TX, but the protocol itself, adding the <bcc> at the end, is sometimes problematic with HMIs, as not many of them support this functionality.

I have used the Unitronics with the built-on HMI screen before, reading fast barcode scanners, worked well. But, that was a canned protocol, no check code, no variable-length strings, etc., so ths one is tougher.

Any recommendations?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...