Jump to content

Recommended Posts

 

Hi!

We have a Unitronics V350 with ethernet card and I want to communicate with a Productivity of the Red lion brand via modbus TCP / IP. Unitronics is a slave and PTV is a master. I am using a socket 2 TCP 502. In crimson 3.0 I discharged the modbus TCP / IP Master in protocol 1 for which it adds a device (Unitronics) using port 502.

How can I display in the crimson the variables from Unitronics to PTV ?

Share this post


Link to post
Share on other sites

Would you post some links to the Red Lion products you are using?  I have no problem looking through other vendors manuals, but don't ask us to go find it.

Joe  T.

  • Upvote 1

Share this post


Link to post
Share on other sites

Just in case you're asking about addressing the V350 and not how to implement in the Red Lion, you can find the slave addressing table in the VisiLogic Help file by going to the Contents tab, then expand Communications, then Communications FBs, then expand MODBUS. There you'll find the topic "Slave Addressing".

Share this post


Link to post
Share on other sites

I have a lot of the DSPLE's running in my place of business. So please define what your wanting to display? Tags from the DSPLE or the tags your sending it??

The forum has been very helpful getting me going with my first Unitronics project

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...