Jump to content

Recommended Posts

Hello,

I am working on a project were I am using a vision V570 and a module EX-D16A3-TO16, the problem is that when I turn on the equipment all the inputs are active, but I do not have connecting even a single input. 

I am new with Unitronics OPLCs , so far I just worked with V350, and it is the first time I am using a EX module, which could be the reason for this to happen?

Thanks

Share this post


Link to post
Share on other sites

The N, P, and common terminals have to be wired for sourcing or sinking per technical papers included with the module. I worked with a V1210 and a 6 module IO behind an EX a month ago. Memory a little fuzzy but I think I seen the same "all inputs true" conditions with N and P terminals floating. Hope that helps! I was using separate 16 IN and 16 out modules, looks like you might have a combo I/O module. Guessing input section would still have P, N, and COM terminals.

Edited by hotwires
  • Upvote 1

Share this post


Link to post
Share on other sites

Thank you hotwires !

You were right, missing N/P connection I saw the diagram but I didn't pay much attention to N/P.

Thank you so much, now is working perfectly

 

Share this post


Link to post
Share on other sites
2 hours ago, Lepton said:

Thank you hotwires !

You were right, missing N/P connection I saw the diagram but I didn't pay much attention to N/P.

Thank you so much, now is working perfectly

 

Glad you were able to get it going quickly and simply. I too was accustomed to Vision's internal jumper source/sink config and AB SLC500 I/O and had to read deeper into things to see what they were doing on extender input modules. 

You will grow to love Unitronics PLC's, their performance to price ratio is amazing. There's a learning curve, but such is life. Happy developing Lepton!

  • Upvote 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...