Jump to content
Sign in to follow this  
jorge melendez

Upload error

Recommended Posts

I want to upload in a Unitronic V130, but I have the following msg: This project cannot be uploaded because:
- the option 'Burn Upload Project' was not selected when the project was downloaded,
- due to incomplete data in the PLC", and upload fails.

What can Ido if the program was not downloaded by the option: Burn Upload Project?

 

Share this post


Link to post
Share on other sites

Hi Jorge,

If the project hasn't been burnt for upload, the only way you're going to get it is via having access to the original *.vlp file in whatever computer or storage media it is in.   If you can't get this, you will likely have a problem.  Bear in mind that you might be getting into "intellectual property" issues, and that may be why the original programmer has done things this way.

Of possible help is to use info mode and find the project's name, which might at least point you in a direction for finding the correct file.  But even this can be wrong, as it depends on whether the original debugging/proving of the program had name changes along the way.

Also check what is on the SD card if it has one in the slot.

cheers,

Aus

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...