Jump to content
Adreasler

Vision 700: PLC on the door, I/O on the backplane?

Recommended Posts

We are working on a project that will be using a Vision 700 unit as the PLC and HMI at the heard of the control scheme. However, we would prefer to NOT have a big bundle of discrete wires running from the backplane  to the enclosure door.  Is there some way to attach an expansion I/O unit to the Vision 700 or to an I/O unit mounted on the back of the V700 using a stock cable setup?  Or should we be designing the enclosure so all the components are mounted to the door instead of to the backplane?

Share this post


Link to post
Share on other sites

Thank you so much.

Not to disparage  Unitronics, but their website does not make it easy to cross-reference components in their PLC/HMI section.  The tables of compatible modules are nice, but it would help if they included direct links to either the pertinent documents in the technical library, or to a catalog page that would give a little more detail on the particular module.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...