Jump to content
Sign in to follow this  
Orr

V700 with V200-18-E46B Analog inputs

Recommended Posts

Hi there,

 

I have V700 with V200-18-E46B snap, 

I`m trying to figure out the connection to the analog input from 4-20ma sensor, 

The data of the v200 state that the maximum V in the analog input is 15, the sensor receives  its V from the controller 24v,

The output voltage from the sensor is 23. Volts .. 

Therefor I would assume there will be problem if I connect it to the input of the analog in (based on the maximum V in of the snap in 15v) 

Am i missing something here? do I need to provide lower voltage to the sensor? add something after the sensor to lower the volts?

 

Help please.

 

Thank you

 

Share this post


Link to post
Share on other sites

Hi Orr,

It seems that you measure voltage at current output with open circuit.

V200-18-E46B internal resistance for inputs AN0-AN2 (10-bit) is 500 oHm , and voltage limit is 15 V.

For AN3-AN8 (12-14-bit)  internal resistance is 37 oHm, and voltage limit is 1.1 V.

B.R.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...