Jump to content

Recommended Posts

Hi all,

Halfway through a download to my V430 PLC over USB, the power to the PLC was cut off.

When I tried to turn the PLC back on again, the screen wont turn on.

Is there a way to factory reset the PLC? Do I need to remove the battery?

Thanks in advance.

Jon

Link to post
Share on other sites

Hi,

What I recommand you is the following:
Turn OFF the PLC-->click and hold the touchscreen-->turn ON the PLC (it will enter to factory mode-->check the communication PLC to PC.
If there is communication: update the PLC OS:

follow the below procedure:

  • Go to connection menu>Communication & O/S> 4th tab check the current version> in the opned window: click on 'next' buttins in order to download OS  to the PLC. 

 

 

                                                ly7Ol0Dmy799Qw6sP3BAADs=

Link to post
Share on other sites

 

On 4/6/2017 at 5:00 AM, liranaftali said:

Turn OFF the PLC-->click and hold the touchscreen-->turn ON the PLC (it will enter to factory mode-->check the communication PLC to PC.
If there is communication: update the PLC OS:

 

For additional information on what to do when a Unitronics goes weird, search the Help for "bootstrap".

Joe T.

 

  • Like 1
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...