Jump to content

Recommended Posts

I have a CANopen device that sends 7 PDOs. Fortunately I only have to read 4 of these PDOs but one of the PDOs that I need to read has a COB ID higher than the 4 standard ones. So I found the Relocate button in the CANopen configuration FB, changed one of the COB id to what I need. Now the bad news is that it doesn't seem to work. I actually modified the 2nd and 3rd COB id and then enterred by COBid, base 0x2A0, in the fourth one. Compiles fine and downloads and the first 3 COB id work just fine.

I have a V570 running OS 4.03 (05) and VisiLogic 9.8.31, should be latest. I have search any and help files, Unitroincs web site, Google but not a single mentioning about the Relocate button. Any help is appreciated.

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...