Jump to content
MartinIT

Unistream and PTO? controling stepper motor?

Recommended Posts

Hello , my guestion is:

Can I use Unistream for controling two steppers motors like in Visio 430-J-TR34(PTO)?

We manufactured one machine with this Visio systém. I used predefined bloks and it was OK.

Is something like PTO in Unisteam? Is sample for direct controling two steppers morors?

Thanks Martin

  • Upvote 1

Share this post


Link to post
Share on other sites

Hello,

I want to point that you can use the EXF-RC15 (Remote high speed IO ) on order to use PTO.

The EXF-RC15 will be connected by CANBUS to the UniStream.

The EXF-RC15 can be programmed in VisiLogic.

Attached is an example.

UniStream_070_exf-rc15_PTO_plus_jogging_two_channels new.ulprEXF-RC15 PTO plus jogging two channel for UniLogic examples.vlp

Share this post


Link to post
Share on other sites
On 1/23/2018 at 3:44 AM, Ofir said:

Hello,

I want to point that you can use the EXF-RC15 (Remote high speed IO ) on order to use PTO.

The EXF-RC15 will be connected by CANBUS to the UniStream.

The EXF-RC15 can be programmed in VisiLogic.

Attached is an example.

UniStream_070_exf-rc15_PTO_plus_jogging_two_channels new.ulprEXF-RC15 PTO plus jogging two channel for UniLogic examples.vlp

Ofir,

I'm looking an example for V350 with EXF-RC15 two motors do you have one, that you can Share? I have an advance but only one motor I can make it work the Y, I have an issue with the communication.. the second is 2Y

1.0 Table X, Z, Y, Y UNICAN.vlp

1.0 V350_PTO_and_Jogging_For_EXF-RC15.vlp

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...