Jump to content

Recommended Posts

Hi,

I try to make a call from the PLC using GPRS and modem Cinterion EHS6T. I successfully prepare the PLC-side modem but when I Start the Call from the PLC it constantly gives me Modem Timeout.

Share this post


Link to post
Share on other sites

Hi,

First check that your signal quality is more than 14.

Also you need to check that the IP address and port you are trying to access are available - you can use a PC which is in the internet and try to access this IP and port via telnet.

 

Share this post


Link to post
Share on other sites

Thanks for the response.

My signal quality is 21. I forwarded a port and successfully accessed it via telnet, but it still gives me the same error when i try to call from the PLC. Do you have any other suggestions?

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...