Jump to content

Recommended Posts

Hi!

 

I have in my system a SM43-J-R20 PLC and A Frequency Inverter from Vacuum (Schmersal).

 

I jus want to show the frequency of the motor on HMI.

Think in using I6 as analog in, i did the JP8 and JP9 both to B (current)

 

The thing is, I don't kwon how to wire it.

 

See the manuals below.

 

PLC/HMI

59c927828a28e_CapturadeTela2017-09-25s12_56_46.thumb.png.c6d32be0acaff2d5227b407cb6280345.png

 

Frequency Inverter Manual

 

 

Terminal 18 (Analog Out)

Terminal 5 (GND)

Terminal 13 (Digital Out Comum)

59c9281d2ea5e_CapturadeTela2017-09-25s12_59_42.thumb.png.3d11f3b1e65b5fda662a8e656993a6c0.png

 

 

Anyone can help me?

 

Thanks!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...