Jump to content
Sign in to follow this  
Dz!

String for storing IP

Recommended Posts

Dear fellows,

Anybody might be knowing - what type of string and what length is necessary to store IP address for IP Address Edit and IP to String and String to IP elements. Official help file is scarce on that.
Additionally, are the IP fields contained within Modbus Remote Slave structs editable or read only (as primarily these get their information from Modbus Ethernet Masters configuration screens)?

Share this post


Link to post
Share on other sites

Hello,

The length of the IP address xxx.xxx.xxx.xxx for string is 15 and  up.

The IP address tag in the struct of remote slave is not editable. 

If you wish to change to the Remote Slave ID or Slave IP directly from the HMI (without downloading application) follow the below steps:

  1. Go to UniApps
  2. Select Network Tab and then MODBUS:
phpC7yfNl

3. Select Ethernet Master or Serial master. Then press on the slave ID or IP that you wish to change:

phpPNWD5A

4. Virtual keypad will appear - change to the required ID or IP and press on Ok,

Now UniStream as MODBUS master will connect to the required ID or IP.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...