Jump to content
C_R_PLC

Project has too many fonts, is there a good way to rectify this?

Recommended Posts

So I'm currently in the process of adapting an old program to fit our current needs for my work, but after adding things to it it's giving me an error saying there are 18 fonts when only 15 are allowed. I've manually gone through and counted and there are only 3 that I can see, but I'm at a loss as to how to go from here.

Is there any quick fix to this or am I going to have to redo the HMI completely?

Share this post


Link to post
Share on other sites

Strange. The project I'm working on right now has 24 fonts installed, of which 17 are in use. It compiles with zero errors. What PLC and VisiLogic version are you using?

Share this post


Link to post
Share on other sites

My suggestion is to download a blank project, then re-download the project giving you problems. Also, make sure the firmware on the PLC is up to date.

Also, in the Fonts Handler in VisiLogic, press the "Delete All Unused" button to make sure you've cleared out everything.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×