Jump to content
Sign in to follow this  
Dowthebow

Convert Zip to ulpr

Recommended Posts

Hi,

Unilogics newbie here.

I've saved a file from  an HMI to a DOK(Usb stick). How do I view that file using the Unilogics software? If I save a file on my PC it is normally a ulpr file. Do I need to convert the zipped file to a ulpr file?

Thanks.

Share this post


Link to post
Share on other sites

A Ulpr file stands for UniLogic Project.

If you saved a file from the HMI to a USB stick then it is not a ulpr.

What does it contain? (the zip), screenshot? trends, csv, data tables?

 

You can extract a zip file with WinZip, WinRar, 7Zip etc.

Share this post


Link to post
Share on other sites

OK, since it does not include the ulpr, but the compiled app.

You should download to the PLC with an "upload" option, then a ulpr could be restored (uploaded) from a PLC. The zip you have created is for cloning the PLC

Share this post


Link to post
Share on other sites
On 12/14/2017 at 7:41 AM, Saragani said:

OK, since it does not include the ulpr, but the compiled app.

You should download to the PLC with an "upload" option, then a ulpr could be restored (uploaded) from a PLC. The zip you have created is for cloning the PLC

But I do not have the logic that is currently on the PLC, If I download to PLC Won't I lose the file? Then what I upload is only what I downloaded??

Share this post


Link to post
Share on other sites

If you download to the PLC then the PLC will lose the file (compiled project in the PLC).

If the original download did not include an "Upload", then the original project cannot be restored (The PLC only have the compiled results in that case).

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×