Jump to content
HST-Heuer

Every touch changes the pixel coulor / Samba SM43 J

Recommended Posts

Hello everyone, 

I am very new in programming with Visilogic. Everything is fine despite the fact that the coulor of the pixels change if I touch the display. 

These marks will be deleted if i switch between the screens. I dont know why this happens because it is really annoying but i couldn't found anything on the internet to stop this.

I hope someone can help me!

Best regards

Fabian

 

Share this post


Link to post
Share on other sites

I've never seen this happen. Assuming you don't have some strange elements on your HMI display, do the following:

1) Confirm you have the correct firmware on the PLC to match the VisiLogic version you are using.

2) Download a blank project file to the PLC.

3) Re-download your project to the PLC and see if the problem still exists.

Share this post


Link to post
Share on other sites

Thanks for the fast response. If I use the Demo-program everything is fine, but the problem still exists if I re-downloaded by own program. 

 

How can I find out the framework of the PLC? 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...