Jump to content
HST-Heuer

Samba SM43 control via iOS App WLAN

Recommended Posts

Dear colleagues, 

i need some support concerning the remote control with an iPhone. My connection is not really stable. I connect the iPhone and after 10-60 seconds the connection fail and I cannot connect to the PLC anymore. So I have to disconnect to the WLAN connection and connect ones more and then it goes, but again only 10-60 seconds. So the question is whether it is an iPhone problem or a general problem with the connection. Or do i have to change the router adjustments? Another oddness is that it is only possible to connect if the IP adress is 192.168.1.1 and this is the same as the router ones. it is a riddle to me how this works. 

Maybe I need an iOS update? 

I am thankful for every guess.

Best regards

Fabian

 

Share this post


Link to post
Share on other sites

Hello,

I found my fault. I had to change the Ethernet settings of the PLC. It was 192.168.1.1 by dafault, but my Router has the same IP adress.

Now everythin is fine. 

Thanks! 

Share this post


Link to post
Share on other sites

Glad you figured it out.  I've never made a mistake like that.  :o

BTW, posting pictures of function blocks that contain information with out posting the corresponding dialog boxes does not count as posting your program.  

For you other readers out there, if you upload your .vlp file we can take a look inside things like the TCP/IP CARD INIT block and be much more helpful in solving the problem.

Joe T.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...