Jump to content
greml1n

Edit the IP address edit via HMI instead of UniApps

Recommended Posts

I would like to allow someone to edit their panel IP, subnet mask, default gateway and DNS through the HMI instead of UniApps. I provided IP address edit boxes on the HMI and linked them to the appropriate functions and unchecked the read only box. It doesn’t work, the addresses revert to the ones in UniApps. Am I missing something?

Share this post


Link to post
Share on other sites

I confirmed that it happens, and I understand why: When you change the IP address then it conflicts with the default gateway and vice versa.
(By conflict, I mean that the first 3 octets of the IP Address and the default gateway do not match), so it reverts them back.

We'll check this issue, and look for a possible solution.  For now, an official bug record was opened.

Share this post


Link to post
Share on other sites

Saragani,

please can you give me an update to this topic? I always get the message "Change fail, not in range" if the default gateway is not set to 0.

With the VisiLogic PLC it was possible to configurate the IP address with a ladder instruction. Each of our facilities has a unique number and according to this number we generate an IP address.
So for us it would be great to have this function also in the UniLogic. (It dosn't matter if a restart von the PLC is required)

It would also be nice to have the Modbus Communication IP as tag value instead of an static IP.

Modifing the CPU IP on the HMI has no affect at all. Is this only possible in the UniApp?

Modbus_Communication_Settings.png

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...