Jump to content

Comment programmer une régulation


Guest Tony

Recommended Posts

Guest Tony

Bonjour,

Actuellement, je suis en BTS et j'ai un projet de régulation de pression qui doit être fonctionnelle en fin d'année.

Au niveau du bloc PID. A l'entrée, j'utilise un capteur de pression 4-20mA et une sortie 0-10V qui va être envoyée au variateur.

Le problème, quand le destinataire est supérieur à la valeur de l'entrée PID, l'erreur est à 12 mais la sortie de la réaction, le reste à 0.

 

 

Link to comment
Share on other sites

  • MVP 2023

Translation:

Quote

 

Hello, Currently, I am in BTS and I have a pressure regulation project which must be functional at the end of the year.

At the level of the PID block. At the entrance, I use a 4-20mA pressure sensor and a 0-10V output that will be sent to the drive.

The problem, when the recipient is greater than the value of the PID input, the error is at 12 but the output of the reaction, the rest at 0.

 

Please let us know which PLC you are using and someone will move this post to the correct forum.

Link to comment
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...