Jump to content

Recommended Posts

 

Hello, I have assembled a MODBUS RS485 network to communicate 2 inverters and 2 softstarters. When performing the tests of communication did not obtain success. When I removed the cable from the EX A2X or A1X module, it started communicating. I am using the COM2 port with the termination jumper.

 

Share this post


Link to post
Share on other sites
1 hour ago, Ausman said:

Initial thought is to check that you don't have the same ID somewhere throughout the 485 network.

cheers,

Aus

 

Ausman good evening, my ID configured in the initial configuration of the network is number "2". The funny thing is that in the V230 model, I was able to communicate with the equipments having the expansion module EX A2X. But the V570 did not work, just when I removed the cable from the EX A2X module.

 

Share this post


Link to post
Share on other sites
2 hours ago, Edilson Adriano Lucas said:

my ID configured in the initial configuration of the network is number "2"

yes.....but are any of the 485 network IDs throughout the network the same?

Aus

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...