Jump to content

Recommended Posts

Hello,

  For a new project, I’m actually trying to establish a Profibus communication between a V350 (slave) and a Siemens PLC (Master) S7 315-2DP.

 V350 (Slave - Address 3)

-Profibus card is installed (V100-17-PB1)

-OS is up to date (comprises a Profibus card)

-Connected with a Profibus cable with Siemens connectors (terminating resistance connected)

-Profibus configuration block on the main routine with SB2 (power-up task)

-Status message = 0

-Error message = 1

-Profibus card detected : SB178 = 1

 

 Siemens PLC   (Master - Address 2)

-Configured with UniProf.gsd file

-Test with only 16 Int in Read and 16 Int in Write

-Test with all Bit and Int in R/W

 

… and no communication

 

Can you advise me something ? or maybe do you have project example or documentation..

 Thanks.

Best regards,

Fab

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...